1 Topic by pumamilenium (edited by pumamilenium 2012-05-06 16:38:30)

  • pumamilenium
  • Member
  • Offline
  • Registered: 2012-05-06
  • Posts: 11

Topic: Instalation successfull but can not send or receive email.

==== Provide required information to help troubleshoot and get quick answer ====
- iRedMail version:  iRedMail-0.7.4
- Linux/BSD distribution name and version: Ubuntu Linux 11.04
- Any related log? Log is helpful for troubleshooting. - No log
====

Hello Guys,
Greetings from Romania. Been searching for an email server solution, and found IredMail. The odd thing is that everytime i try to install the mail server, it installs corectly, and i can acces the mail server, BUT, i can't send, receive or make anything with the server. I had my server built in a virtual environment, with full virtualization, and i can't make it to send or receive mail...
DNS problems are excluded, i've install it on dedicated server, with dedicated IP and all needed things, but it still fails to send or receive mails. I thought about port limitation, from the ISP, but i have a dedicated 10mbps UP/DOWN at my workplace, where i have a Static IP server, and it still doesn't work. It's bothering me a lot. I've searched for a mail server solution and thought  that i found it, for bussiness use and other, but it simply doesn't want to work.
I installed IredMail from scratch, with no succes. all i can do is log in the server, see the mail folders, and that's it. it's so upsetting... to se the server there but with no succes in using it.

Anyone some ideas ? or remarks ? about how to make a iredmail server the right and good way ?

Thanks ! smile

----

Spider Email Archiver: On-Premises, lightweight email archiving software developed by iRedMail team. Supports Amazon S3 compatible storage and custom branding.

2 Reply by vasanth

  • vasanth
  • Member
  • Offline
  • Registered: 2012-04-30
  • Posts: 19

Re: Instalation successfull but can not send or receive email.

You may want to post the errors you are encountering and log file if any.

3 Reply by ZhangHuangbin

  • ZhangHuangbin
  • ZhangHuangbin
  • iRedMail Developers
  • Offline
  • Registered: 2009-05-06
  • Posts: 31,155

Re: Instalation successfull but can not send or receive email.

As vasanth says, please clearly explain what "cannot send" means, and post related error log in Postfix log file to help troubleshoot.

4 Reply by pumamilenium

  • pumamilenium
  • Member
  • Offline
  • Registered: 2012-05-06
  • Posts: 11

Re: Instalation successfull but can not send or receive email.

no problem guys. i will post some files, from /var/log, so you can tell me your opinion.
i really want to have this mail server working, it's taking me 5 days and i still haven't found a working email server...

5 Reply by pumamilenium (edited by pumamilenium 2012-05-10 14:16:36)

  • pumamilenium
  • Member
  • Offline
  • Registered: 2012-05-06
  • Posts: 11

Re: Instalation successfull but can not send or receive email.

May  7 09:19:39 facit postfix/master[14785]: daemon started -- version 2.8.5, configuration /etc/postfix
May  7 09:20:03 facit postfix/pickup[14788]: AFF27E0D74: uid=33 from=<www-data>
May  7 09:20:03 facit postfix/cleanup[16613]: AFF27E0D74: message-id=<20120507062003.AFF27E0D74@qwert.ro>
May  7 09:20:03 facit postfix/qmgr[14789]: AFF27E0D74: from=<www-data@qerty.ro>, size=832, nrcpt=1 (queue active)
May  7 09:20:03 facit postfix/local[16619]: AFF27E0D74: to=<www-data@querty.ro>, orig_to=<www-data>, relay=local, delay=0.18, delays=0.14/0.04/0/0.01, dsn=2.0.0, status=sent (delivered to mailbox)
May  7 09:20:03 facit postfix/qmgr[14789]: AFF27E0D74: removed
May  7 09:20:14 facit dovecot: master: Dovecot v2.0.13 starting up (core dumps disabled)
May  7 09:20:14 facit dovecot: ssl-params: Generating SSL parameters
May  7 09:20:18 facit dovecot: config: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill)
May  7 09:20:18 facit dovecot: master: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill)
May  7 09:20:18 facit dovecot: ssl-params: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill)
May  7 09:20:18 facit dovecot: log: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill)
May  7 09:20:18 facit dovecot: anvil: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill)
May  7 09:20:18 facit dovecot: master: Error: service(anvil): Socket already exists: /var/run/dovecot/anvil
May  7 09:20:18 facit dovecot: master: Error: service(anvil): Socket already exists: /var/run/dovecot/anvil-auth-penalty
May  7 09:20:18 facit dovecot: master: Fatal: Failed to start listeners
May  7 09:20:20 facit dovecot: master: Dovecot v2.0.13 starting up (core dumps disabled)
May  7 09:20:21 facit dovecot: master: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill)
May  7 09:20:21 facit dovecot: config: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill)
May  7 09:20:21 facit dovecot: ssl-params: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill)
May  7 09:20:21 facit dovecot: log: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill)
May  7 09:20:21 facit dovecot: anvil: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill)
May  7 09:20:22 facit dovecot: master: Error: service(anvil): Socket already exists: /var/run/dovecot/anvil
May  7 09:20:22 facit dovecot: master: Error: service(anvil): Socket already exists: /var/run/dovecot/anvil-auth-penalty
May  7 09:20:22 facit dovecot: master: Fatal: Failed to start listeners
May  7 09:20:22 facit dovecot: master: Error: service(anvil): Socket already exists: /var/run/dovecot/anvil
May  7 09:20:22 facit dovecot: master: Error: service(anvil): Socket already exists: /var/run/dovecot/anvil-auth-penalty
May  7 09:20:22 facit dovecot: master: Fatal: Failed to start listeners
May  7 09:20:50 facit amavis[19019]: starting.  /usr/sbin/amavisd-new at querty.ro amavisd-new-2.6.5 (20110407), Unicode aware, LC_ALL="C", LANG="en_US.UTF-8"
May  7 09:20:50 facit amavis[19019]: Perl version               5.012004
May  7 09:20:50 facit amavis[19026]: Net::Server: Group Not Defined.  Defaulting to EGID '120 120'
May  7 09:20:50 facit amavis[19026]: Net::Server: User Not Defined.  Defaulting to EUID '111'
May  7 09:20:51 facit amavis[19026]: Module Amavis::Conf        2.208
May  7 09:20:51 facit amavis[19026]: Module Archive::Zip        1.30
May  7 09:20:51 facit amavis[19026]: Module BerkeleyDB          0.48
May  7 09:20:51 facit amavis[19026]: Module Compress::Zlib      2.024
May  7 09:20:51 facit amavis[19026]: Module Convert::TNEF       0.17
May  7 09:20:51 facit amavis[19026]: Module Convert::UUlib      1.4
May  7 09:20:51 facit amavis[19026]: Module Crypt::OpenSSL::RSA 0.27
May  7 09:20:51 facit amavis[19026]: Module Digest::MD5         2.39
May  7 09:20:51 facit amavis[19026]: Module Digest::SHA         5.47
May  7 09:20:51 facit amavis[19026]: Module IO::Socket::INET6   2.65
May  7 09:20:51 facit amavis[19026]: Module MIME::Entity        5.502
May  7 09:20:51 facit amavis[19026]: Module MIME::Parser        5.502
May  7 09:20:51 facit amavis[19026]: Module MIME::Tools         5.502
May  7 09:20:51 facit amavis[19026]: Module Mail::DKIM::Signer  0.39
May  7 09:20:51 facit amavis[19026]: Module Mail::DKIM::Verifier 0.39
May  7 09:20:51 facit amavis[19026]: Module Mail::Header        2.08
May  7 09:20:51 facit amavis[19026]: Module Mail::Internet      2.08
May  7 09:20:51 facit amavis[19026]: Module Net::DNS            0.66
May  7 09:20:51 facit amavis[19026]: Module Net::Server         0.99
May  7 09:20:51 facit amavis[19026]: Module Socket6             0.23
May  7 09:20:51 facit amavis[19026]: Module Time::HiRes         1.9719
May  7 09:20:51 facit amavis[19026]: Module Unix::Syslog        1.1
May  7 09:20:51 facit amavis[19026]: Amavis::DB code      loaded
May  7 09:20:51 facit amavis[19026]: Amavis::Cache code   loaded
May  7 09:20:51 facit amavis[19026]: SQL base code        NOT loaded
May  7 09:20:51 facit amavis[19026]: SQL::Log code        NOT loaded
May  7 09:20:51 facit amavis[19026]: SQL::Quarantine      NOT loaded
May  7 09:20:51 facit amavis[19026]: Lookup::SQL code     NOT loaded
May  7 09:20:51 facit amavis[19026]: Lookup::LDAP code    NOT loaded
May  7 09:20:51 facit amavis[19026]: AM.PDP-in proto code loaded
May  7 09:20:51 facit amavis[19026]: SMTP-in proto code   loaded
May  7 09:20:51 facit amavis[19026]: Courier proto code   NOT loaded
May  7 09:20:51 facit amavis[19026]: SMTP-out proto code  loaded
May  7 09:20:51 facit amavis[19026]: Pipe-out proto code  NOT loaded
May  7 09:20:51 facit amavis[19026]: BSMTP-out proto code NOT loaded
May  7 09:20:51 facit amavis[19026]: Local-out proto code loaded
May  7 09:20:51 facit amavis[19026]: OS_Fingerprint code  NOT loaded
May  7 09:20:51 facit amavis[19026]: ANTI-VIRUS code      NOT loaded
May  7 09:20:51 facit amavis[19026]: ANTI-SPAM code       NOT loaded
May  7 09:20:51 facit amavis[19026]: ANTI-SPAM-EXT code   NOT loaded
May  7 09:20:51 facit amavis[19026]: ANTI-SPAM-C code     NOT loaded
May  7 09:20:51 facit amavis[19026]: ANTI-SPAM-SA code    NOT loaded
May  7 09:20:51 facit amavis[19026]: Unpackers code       loaded
May  7 09:20:51 facit amavis[19026]: DKIM code            loaded
May  7 09:20:51 facit amavis[19026]: Tools code           NOT loaded
May  7 09:20:51 facit amavis[19026]: Found $file            at /usr/bin/file
May  7 09:20:51 facit amavis[19026]: Found $altermime       at /usr/bin/altermime
May  7 09:20:51 facit amavis[19026]: Internal decoder for .mail
May  7 09:20:51 facit amavis[19026]: No decoder for       .F   
May  7 09:20:51 facit amavis[19026]: Found decoder for    .Z    at /bin/uncompress
May  7 09:20:51 facit amavis[19026]: Internal decoder for .gz 
May  7 09:20:51 facit amavis[19026]: Found decoder for    .bz2  at /bin/bzip2 -d
May  7 09:20:51 facit amavis[19026]: Found decoder for    .lzo  at /usr/bin/lzop -d
May  7 09:20:51 facit amavis[19026]: Found decoder for    .rpm  at /usr/bin/rpm2cpio
May  7 09:20:51 facit amavis[19026]: Found decoder for    .cpio at /usr/bin/pax
May  7 09:20:51 facit amavis[19026]: Found decoder for    .tar  at /usr/bin/pax
May  7 09:20:51 facit amavis[19026]: Found decoder for    .deb  at /usr/bin/ar
May  7 09:20:51 facit amavis[19026]: Internal decoder for .zip
May  7 09:20:51 facit amavis[19026]: Found decoder for    .7z   at /usr/bin/7zr
May  7 09:20:51 facit amavis[19026]: Found decoder for    .rar  at /usr/bin/unrar-free
May  7 09:20:51 facit amavis[19026]: Found decoder for    .arj  at /usr/bin/arj
May  7 09:20:51 facit amavis[19026]: Found decoder for    .arc  at /usr/bin/nomarch
May  7 09:20:51 facit amavis[19026]: Found decoder for    .zoo  at /usr/bin/zoo
May  7 09:20:51 facit amavis[19026]: No decoder for       .lha
May  7 09:20:51 facit amavis[19026]: Found decoder for    .doc  at /usr/bin/ripole
May  7 09:20:51 facit amavis[19026]: Found decoder for    .cab  at /usr/bin/cabextract
May  7 09:20:51 facit amavis[19026]: No decoder for       .tnef
May  7 09:20:51 facit amavis[19026]: Internal decoder for .tnef
May  7 09:20:51 facit amavis[19026]: Found decoder for    .exe  at /usr/bin/unrar-free; /usr/bin/arj
May  7 09:20:51 facit amavis[19026]: Creating db in /var/lib/amavis/db/; BerkeleyDB 0.48, libdb 5.1
May  7 09:21:54 facit postfix/master[14785]: terminating on signal 15
May  7 09:21:55 facit postfix/master[20279]: daemon started -- version 2.8.5, configuration /etc/postfix
May  7 09:22:03 facit amavis[20479]: starting.  /usr/sbin/amavisd-new at querty.ro amavisd-new-2.6.5 (20110407), Unicode aware, LC_ALL="C", LANG="en_US.UTF-8"
May  7 09:22:03 facit amavis[20479]: Perl version               5.012004
May  7 09:22:04 facit amavis[20486]: Net::Server: Group Not Defined.  Defaulting to EGID '120 120'
May  7 09:22:04 facit amavis[20486]: Net::Server: User Not Defined.  Defaulting to EUID '111'
May  7 09:22:04 facit amavis[20486]: Module Amavis::Conf        2.208
May  7 09:22:04 facit amavis[20486]: Module Archive::Zip        1.30
May  7 09:22:04 facit amavis[20486]: Module BerkeleyDB          0.48
May  7 09:22:04 facit amavis[20486]: Module Compress::Zlib      2.024
May  7 09:22:04 facit amavis[20486]: Module Convert::TNEF       0.17
May  7 09:22:04 facit amavis[20486]: Module Convert::UUlib      1.4
May  7 09:22:04 facit amavis[20486]: Module Crypt::OpenSSL::RSA 0.27
May  7 09:22:04 facit amavis[20486]: Module DBD::mysql          4.019
May  7 09:22:04 facit amavis[20486]: Module DBI                 1.616
May  7 09:22:04 facit amavis[20486]: Module DB_File             1.82
May  7 09:22:04 facit amavis[20486]: Module Digest::MD5         2.39
May  7 09:22:04 facit amavis[20486]: Module Digest::SHA         5.47
May  7 09:22:04 facit amavis[20486]: Module IO::Socket::INET6   2.65
May  7 09:22:04 facit amavis[20486]: Module MIME::Entity        5.502
May  7 09:22:04 facit amavis[20486]: Module MIME::Parser        5.502
May  7 09:22:04 facit amavis[20486]: Module MIME::Tools         5.502
May  7 09:22:04 facit amavis[20486]: Module Mail::DKIM::Signer  0.39
May  7 09:22:04 facit amavis[20486]: Module Mail::DKIM::Verifier 0.39
May  7 09:22:04 facit amavis[20486]: Module Mail::Header        2.08
May  7 09:22:04 facit amavis[20486]: Module Mail::Internet      2.08
May  7 09:22:04 facit amavis[20486]: Module Mail::SPF           v2.007
May  7 09:22:04 facit amavis[20486]: Module Mail::SpamAssassin  3.003002
May  7 09:22:04 facit amavis[20486]: Module Net::DNS            0.66
May  7 09:22:04 facit amavis[20486]: Module Net::LDAP           0.4001
May  7 09:22:04 facit amavis[20486]: Module Net::Server         0.99
May  7 09:22:04 facit amavis[20486]: Module NetAddr::IP         4.044
May  7 09:22:04 facit amavis[20486]: Module Socket6             0.23
May  7 09:22:04 facit amavis[20486]: Module Time::HiRes         1.9719
May  7 09:22:04 facit amavis[20486]: Module URI                 1.58
May  7 09:22:04 facit amavis[20486]: Module Unix::Syslog        1.1
May  7 09:22:04 facit amavis[20486]: Amavis::DB code      loaded
May  7 09:22:04 facit amavis[20486]: Amavis::Cache code   loaded
May  7 09:22:04 facit amavis[20486]: SQL base code        loaded
May  7 09:22:04 facit amavis[20486]: SQL::Log code        loaded
May  7 09:22:04 facit amavis[20486]: SQL::Quarantine      NOT loaded
May  7 09:22:04 facit amavis[20486]: Lookup::SQL code     NOT loaded
May  7 09:22:04 facit amavis[20486]: Lookup::LDAP code    loaded
May  7 09:22:04 facit amavis[20486]: AM.PDP-in proto code loaded
May  7 09:22:04 facit amavis[20486]: SMTP-in proto code   loaded
May  7 09:22:04 facit amavis[20486]: Courier proto code   NOT loaded
May  7 09:22:04 facit amavis[20486]: SMTP-out proto code  loaded
May  7 09:22:04 facit amavis[20486]: Pipe-out proto code  NOT loaded
May  7 09:22:04 facit amavis[20486]: BSMTP-out proto code NOT loaded
May  7 09:22:04 facit amavis[20486]: Local-out proto code loaded
May  7 09:22:04 facit amavis[20486]: OS_Fingerprint code  NOT loaded
May  7 09:22:04 facit amavis[20486]: ANTI-VIRUS code      loaded
May  7 09:22:04 facit amavis[20486]: ANTI-SPAM code       loaded
May  7 09:22:04 facit amavis[20486]: ANTI-SPAM-EXT code   NOT loaded
May  7 09:22:04 facit amavis[20486]: ANTI-SPAM-C code     NOT loaded
May  7 09:22:04 facit amavis[20486]: ANTI-SPAM-SA code    loaded
May  7 09:22:04 facit amavis[20486]: Unpackers code       loaded
May  7 09:22:04 facit amavis[20486]: DKIM code            loaded
May  7 09:22:04 facit amavis[20486]: Tools code           NOT loaded
May  7 09:22:04 facit amavis[20486]: Found $file            at /usr/bin/file
May  7 09:22:04 facit amavis[20486]: Found $altermime       at /usr/bin/altermime
May  7 09:22:04 facit amavis[20486]: Internal decoder for .mail
May  7 09:22:04 facit amavis[20486]: No decoder for       .F   
May  7 09:22:04 facit amavis[20486]: Found decoder for    .Z    at /bin/uncompress
May  7 09:22:04 facit amavis[20486]: Internal decoder for .gz 
May  7 09:22:04 facit amavis[20486]: Found decoder for    .bz2  at /bin/bzip2 -d
May  7 09:22:04 facit amavis[20486]: Found decoder for    .lzo  at /usr/bin/lzop -d
May  7 09:22:04 facit amavis[20486]: Found decoder for    .rpm  at /usr/bin/rpm2cpio
May  7 09:22:04 facit amavis[20486]: Found decoder for    .cpio at /usr/bin/pax
May  7 09:22:04 facit amavis[20486]: Found decoder for    .tar  at /usr/bin/pax
May  7 09:22:04 facit amavis[20486]: Found decoder for    .deb  at /usr/bin/ar
May  7 09:22:04 facit amavis[20486]: Internal decoder for .zip
May  7 09:22:04 facit amavis[20486]: Found decoder for    .7z   at /usr/bin/7zr
May  7 09:22:04 facit amavis[20486]: Found decoder for    .rar  at /usr/bin/unrar-free
May  7 09:22:04 facit amavis[20486]: Found decoder for    .arj  at /usr/bin/arj
May  7 09:22:04 facit amavis[20486]: Found decoder for    .arc  at /usr/bin/nomarch
May  7 09:22:04 facit amavis[20486]: Found decoder for    .zoo  at /usr/bin/zoo
May  7 09:22:04 facit amavis[20486]: No decoder for       .lha
May  7 09:22:04 facit amavis[20486]: Found decoder for    .doc  at /usr/bin/ripole
May  7 09:22:04 facit amavis[20486]: Found decoder for    .cab  at /usr/bin/cabextract
May  7 09:22:04 facit amavis[20486]: No decoder for       .tnef
May  7 09:22:04 facit amavis[20486]: Internal decoder for .tnef
May  7 09:22:04 facit amavis[20486]: Found decoder for    .exe  at /usr/bin/unrar-free; /usr/bin/arj
May  7 09:22:04 facit amavis[20486]: Using primary internal av scanner code for ClamAV-clamd
May  7 09:22:04 facit amavis[20486]: Found secondary av scanner ClamAV-clamscan at /usr/bin/clamscan
May  7 09:22:04 facit amavis[20486]: Creating db in /var/lib/amavis/db/; BerkeleyDB 0.48, libdb 5.1
May  7 09:22:48 facit postfix/pickup[20285]: B8143E0D65: uid=0 from=<root>
May  7 09:22:52 facit postfix/cleanup[21652]: B8143E0D65: message-id=<20120507062248.B8143E0D65@facit.ro>
May  7 09:22:52 facit postfix/pickup[20285]: 11705E0D61: uid=0 from=<root>
May  7 09:22:52 facit postfix/cleanup[21652]: 11705E0D61: message-id=<20120507062252.11705E0D61@facit.ro>
May  7 09:22:52 facit postfix/qmgr[20284]: 11705E0D61: from=<root@facit.ro>, size=1326, nrcpt=1 (queue active)
May  7 09:22:52 facit postfix/qmgr[20284]: B8143E0D65: from=<root@facit.ro>, size=9085, nrcpt=1 (queue active)
May  7 09:22:55 facit postfix/pipe[21665]: B8143E0D65: to=<www@localplus.ro>, relay=dovecot, delay=6.8, delays=4/0.04/0/2.8, dsn=2.0.0, status=sent (delivered via dovecot service)
May  7 09:22:55 facit postfix/qmgr[20284]: B8143E0D65: removed
May  7 09:22:55 facit postfix/pipe[21664]: 11705E0D61: to=<www@localplus.ro>, relay=dovecot, delay=6.6, delays=3.8/0.06/0/2.8, dsn=2.0.0, status=sent (delivered via dovecot service)
May  7 09:22:55 facit postfix/qmgr[20284]: 11705E0D61: removed
May  7 09:26:10 facit postfix/smtpd[21678]: connect from unknown[192.168.2.1]
May  7 09:26:10 facit postfix/smtpd[21683]: connect from unknown[192.168.2.1]
May  7 09:26:11 facit postfix/smtpd[21686]: connect from unknown[192.168.2.1]
May  7 09:26:11 facit postfix/smtpd[21687]: connect from unknown[192.168.2.1]
May  7 09:26:11 facit postfix/smtpd[21686]: disconnect from unknown[192.168.2.1]
May  7 09:26:11 facit postfix/smtpd[21683]: disconnect from unknown[192.168.2.1]
May  7 09:26:11 facit postfix/smtpd[21678]: disconnect from unknown[192.168.2.1]
May  7 09:26:11 facit postfix/smtpd[21687]: disconnect from unknown[192.168.2.1]
May  7 09:27:03 facit postfix/smtpd[21683]: connect from unknown[192.168.2.1]
May  7 09:27:03 facit postfix/smtpd[21678]: connect from unknown[192.168.2.1]
May  7 09:27:03 facit postfix/smtpd[21683]: disconnect from unknown[192.168.2.1]
May  7 09:27:03 facit postfix/smtpd[21678]: warning: TLS library problem: 21678:error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca:s3_pkt.c:1195:SSL alert number 48:
May  7 09:27:03 facit postfix/smtpd[21678]: lost connection after STARTTLS from unknown[192.168.2.1]
May  7 09:27:03 facit postfix/smtpd[21678]: disconnect from unknown[192.168.2.1]
May  7 09:27:13 facit postfix/smtpd[21686]: connect from unknown[192.168.2.1]
May  7 09:27:13 facit postfix/smtpd[21687]: connect from unknown[192.168.2.1]
May  7 09:27:13 facit postfix/smtpd[21686]: disconnect from unknown[192.168.2.1]
May  7 09:27:14 facit postfix/smtpd[21687]: 1E820E0D9E: client=unknown[192.168.2.1], sasl_method=PLAIN, sasl_username=office@qwerty.ro
May  7 09:27:15 facit postfix/cleanup[21706]: 1E820E0D9E: message-id=<4FA76B50.4060707@localplus.ro>
May  7 09:27:15 facit postfix/qmgr[20284]: 1E820E0D9E: from=<office@qwerty.ro>, size=544, nrcpt=1 (queue active)
May  7 09:27:15 facit postfix/smtpd[21687]: disconnect from unknown[192.168.2.1]
May  7 09:27:18 facit postfix/smtpd[21718]: connect from localhost[127.0.0.1]
May  7 09:27:18 facit postfix/smtpd[21718]: 65DBEE0DAA: client=localhost[127.0.0.1]
May  7 09:27:18 facit postfix/cleanup[21706]: 65DBEE0DAA: message-id=<4FA76B50.4060707@localplus.ro>
May  7 09:27:18 facit postfix/qmgr[20284]: 65DBEE0DAA: from=<office@qwerty.ro>, size=1446, nrcpt=1 (queue active)
May  7 09:27:18 facit postfix/smtpd[21718]: disconnect from localhost[127.0.0.1]
May  7 09:27:18 facit amavis[20978]: (20978-01) Passed CLEAN, MYNETS/MYUSERS LOCAL [192.168.2.1] [192.168.2.1] <office@qwerty.ro> -> <pumamilenium@yahoo.com>, Message-ID: <4FA76B50.4060707@localplus.ro>, mail_id: 9pH8bSzY29JZ, Hits: -10, size: 544, queued_as: 65DBEE0DAA, 3092 ms
May  7 09:27:18 facit postfix/smtp[21708]: 1E820E0D9E: to=<pumamilenium@yahoo.com>, relay=127.0.0.1[127.0.0.1]:10024, delay=4.8, delays=1.4/0.03/0.25/3.1, dsn=2.0.0, status=sent (250 2.0.0 from MTA([127.0.0.1]:10025): 250 2.0.0 Ok: queued as 65DBEE0DAA)
May  7 09:27:18 facit postfix/qmgr[20284]: 1E820E0D9E: removed
May  7 09:27:20 facit postfix/smtp[21719]: 65DBEE0DAA: to=<pumamilenium@yahoo.com>, relay=mta7.am0.yahoodns.net[66.94.238.147]:25, delay=2.2, delays=0.28/0.07/0.8/1.1, dsn=2.0.0, status=sent (250 ok dirdel)
May  7 09:27:20 facit postfix/qmgr[20284]: 65DBEE0DAA: removed
May  7 09:28:00 facit postfix/smtpd[21724]: connect from nm16.bullet.mail.sp2.yahoo.com[98.139.91.86]
May  7 09:28:01 facit cbpolicyd[20470]: module=Greylisting, action=defer, host=98.139.91.86, helo=nm16.bullet.mail.sp2.yahoo.com, from=pumamilenium@yahoo.com, to=office@qwerty.ro, reason=greylisted
May  7 09:28:01 facit postfix/smtpd[21724]: NOQUEUE: reject: RCPT from nm16.bullet.mail.sp2.yahoo.com[98.139.91.86]: 451 4.7.1 <office@qwerty.ro>: Recipient address rejected: Greylisting in effect, please come back later; from=<pumamilenium@yahoo.com> to=<office@qwerty.ro> proto=SMTP helo=<nm16.bullet.mail.sp2.yahoo.com>
May  7 09:28:01 facit postfix/smtpd[21724]: disconnect from nm16.bullet.mail.sp2.yahoo.com[98.139.91.86]
May  7 09:31:06 facit postfix/smtpd[21810]: connect from nm16.bullet.mail.sp2.yahoo.com[98.139.91.86]
May  7 09:31:07 facit cbpolicyd[20471]: module=Greylisting, action=defer, host=98.139.91.86, helo=nm16.bullet.mail.sp2.yahoo.com, from=pumamilenium@yahoo.com, to=office@qwerty.ro, reason=greylisted, tries=2
May  7 09:31:07 facit postfix/smtpd[21810]: NOQUEUE: reject: RCPT from nm16.bullet.mail.sp2.yahoo.com[98.139.91.86]: 451 4.7.1 <office@qwerty.ro>: Recipient address rejected: Greylisting in effect, please come back later; from=<pumamilenium@yahoo.com> to=<office@qwerty.ro> proto=SMTP helo=<nm16.bullet.mail.sp2.yahoo.com>
May  7 09:31:07 facit postfix/smtpd[21810]: disconnect from nm16.bullet.mail.sp2.yahoo.com[98.139.91.86]
May  7 09:32:51 facit postfix/smtpd[21825]: connect from unknown[192.168.2.1]
May  7 09:32:52 facit postfix/smtpd[21826]: connect from unknown[192.168.2.1]
May  7 09:32:52 facit postfix/smtpd[21825]: disconnect from unknown[192.168.2.1]
May  7 09:32:52 facit postfix/smtpd[21826]: 73B02E0DB0: client=unknown[192.168.2.1], sasl_method=PLAIN, sasl_username=office@qwerty.ro
May  7 09:32:52 facit postfix/cleanup[21828]: 73B02E0DB0: message-id=<4FA76CA2.6010400@localplus.ro>
May  7 09:32:52 facit postfix/qmgr[20284]: 73B02E0DB0: from=<office@qwerty.ro>, size=531, nrcpt=1 (queue active)
May  7 09:32:52 facit postfix/smtpd[21826]: disconnect from unknown[192.168.2.1]
May  7 09:32:53 facit postfix/smtpd[21833]: connect from localhost[127.0.0.1]
May  7 09:32:53 facit postfix/smtpd[21833]: 7298FE0DB4: client=localhost[127.0.0.1]
May  7 09:32:53 facit postfix/cleanup[21828]: 7298FE0DB4: message-id=<4FA76CA2.6010400@localplus.ro>
May  7 09:32:53 facit postfix/qmgr[20284]: 7298FE0DB4: from=<office@qwerty.ro>, size=1421, nrcpt=1 (queue active)
May  7 09:32:53 facit postfix/smtpd[21833]: disconnect from localhost[127.0.0.1]
May  7 09:32:53 facit amavis[20979]: (20979-01) Passed CLEAN, MYNETS/MYUSERS LOCAL [192.168.2.1] [192.168.2.1] <office@qwerty.ro> -> <andrei@qwerty.ro>, Message-ID: <4FA76CA2.6010400@localplus.ro>, mail_id: ZUsk8qsY3tLe, Hits: -10, size: 531, queued_as: 7298FE0DB4, 884 ms
May  7 09:32:53 facit postfix/smtp[21830]: 73B02E0DB0: to=<andrei@qwerty.ro>, relay=127.0.0.1[127.0.0.1]:10024, delay=1.4, delays=0.38/0.03/0.1/0.86, dsn=2.0.0, status=sent (250 2.0.0 from MTA([127.0.0.1]:10025): 250 2.0.0 Ok: queued as 7298FE0DB4)
May  7 09:32:53 facit postfix/qmgr[20284]: 73B02E0DB0: removed
May  7 09:32:57 facit postfix/smtp[21834]: 7298FE0DB4: to=<andrei@qwerty.ro>, relay=avrnet.ro[209.105.255.163]:25, delay=3.6, delays=0.01/0.03/2.7/0.9, dsn=2.0.0, status=sent (250 OK id=1SRHV6-000l23-46)
May  7 09:32:57 facit postfix/qmgr[20284]: 7298FE0DB4: removed
May  7 09:33:41 facit postfix/smtpd[21835]: warning: 209.105.255.163: hostname cust-209-105-255-163.corexchange.com verification failed: Name or service not known
May  7 09:33:41 facit postfix/smtpd[21835]: connect from unknown[209.105.255.163]
May  7 09:33:43 facit cbpolicyd[20471]: module=Greylisting, action=defer, host=209.105.255.163, helo=pixie.sixserve.com, from=andrei@qwerty.ro, to=office@qwerty.ro, reason=greylisted
May  7 09:33:43 facit postfix/smtpd[21835]: NOQUEUE: reject: RCPT from unknown[209.105.255.163]: 451 4.7.1 <office@qwerty.ro>: Recipient address rejected: Greylisting in effect, please come back later; from=<andrei@qwerty.ro> to=<office@qwerty.ro> proto=ESMTP helo=<pixie.sixserve.com>
May  7 09:33:43 facit postfix/smtpd[21835]: disconnect from unknown[209.105.255.163]
May  7 09:34:37 facit postfix/smtpd[21835]: connect from nm16.bullet.mail.sp2.yahoo.com[98.139.91.86]
May  7 09:34:38 facit cbpolicyd[21725]: module=Greylisting, action=pass, host=98.139.91.86, helo=nm16.bullet.mail.sp2.yahoo.com, from=pumamilenium@yahoo.com, to=office@qwerty.ro, reason=authenticated
May  7 09:34:38 facit postfix/smtpd[21835]: 6A2E8E0DB0: client=nm16.bullet.mail.sp2.yahoo.com[98.139.91.86]
May  7 09:34:38 facit postfix/cleanup[21865]: 6A2E8E0DB0: message-id=<1336372079.62992.YahooMailNeo@web112609.mail.gq1.yahoo.com>
May  7 09:34:40 facit postfix/qmgr[20284]: 6A2E8E0DB0: from=<pumamilenium@yahoo.com>, size=4328, nrcpt=1 (queue active)
May  7 09:34:40 facit postfix/smtpd[21835]: disconnect from nm16.bullet.mail.sp2.yahoo.com[98.139.91.86]
May  7 09:34:42 facit postfix/smtpd[21870]: connect from localhost[127.0.0.1]
May  7 09:34:42 facit postfix/smtpd[21870]: 4412AE0DB4: client=localhost[127.0.0.1]
May  7 09:34:42 facit postfix/cleanup[21865]: 4412AE0DB4: message-id=<1336372079.62992.YahooMailNeo@web112609.mail.gq1.yahoo.com>
May  7 09:34:42 facit postfix/qmgr[20284]: 4412AE0DB4: from=<pumamilenium@yahoo.com>, size=4925, nrcpt=1 (queue active)
May  7 09:34:42 facit postfix/smtpd[21870]: disconnect from localhost[127.0.0.1]
May  7 09:34:42 facit amavis[20978]: (20978-02) Passed CLEAN, LOCAL [98.139.91.86] [82.137.34.156] <pumamilenium@yahoo.com> -> <office@qwerty.ro>, Message-ID: <1336372079.62992.YahooMailNeo@web112609.mail.gq1.yahoo.com>, mail_id: GDyMlXXFSXLj, Hits: -0.108, size: 4324, queued_as: 4412AE0DB4, dkim_id=@yahoo.com,pumamilenium@yahoo.com, 2204 ms
May  7 09:34:42 facit postfix/smtp[21866]: 6A2E8E0DB0: to=<office@qwerty.ro>, relay=127.0.0.1[127.0.0.1]:10024, delay=4.2, delays=1.9/0.01/0.01/2.2, dsn=2.0.0, status=sent (250 2.0.0 from MTA([127.0.0.1]:10025): 250 2.0.0 Ok: queued as 4412AE0DB4)
May  7 09:34:42 facit postfix/qmgr[20284]: 6A2E8E0DB0: removed
May  7 09:34:42 facit postfix/pipe[21871]: 4412AE0DB4: to=<office@qwerty.ro>, relay=dovecot, delay=0.13, delays=0.01/0.02/0/0.1, dsn=2.0.0, status=sent (delivered via dovecot service)
May  7 09:34:42 facit postfix/qmgr[20284]: 4412AE0DB4: removed
May  7 09:36:10 facit postfix/anvil[21685]: statistics: max connection rate 6/60s for (submission:192.168.2.1) at May  7 09:27:03
May  7 09:36:10 facit postfix/anvil[21685]: statistics: max connection count 4 for (submission:192.168.2.1) at May  7 09:26:11
May  7 09:36:10 facit postfix/anvil[21685]: statistics: max cache size 2 at May  7 09:28:00
May  7 09:37:38 facit postfix/smtpd[21891]: warning: 209.105.255.163: hostname cust-209-105-255-163.corexchange.com verification failed: Name or service not known
May  7 09:37:38 facit postfix/smtpd[21891]: connect from unknown[209.105.255.163]
May  7 09:37:39 facit cbpolicyd[20471]: module=Greylisting, action=defer, host=209.105.255.163, helo=pixie.sixserve.com, from=andrei@qwerty.ro, to=office@qwerty.ro, reason=greylisted, tries=2
May  7 09:37:39 facit postfix/smtpd[21891]: NOQUEUE: reject: RCPT from unknown[209.105.255.163]: 451 4.7.1 <office@qwerty.ro>: Recipient address rejected: Greylisting in effect, please come back later; from=<andrei@qwerty.ro> to=<office@qwerty.ro> proto=ESMTP helo=<pixie.sixserve.com>
May  7 09:37:39 facit postfix/smtpd[21891]: disconnect from unknown[209.105.255.163]


hy guys, this is the log, from /var/log/mail.log
it greylisting the problem... ? ?!
how can i remove it  ? ideas ?

6 Reply by ZhangHuangbin

  • ZhangHuangbin
  • ZhangHuangbin
  • iRedMail Developers
  • Offline
  • Registered: 2009-05-06
  • Posts: 31,155

Re: Instalation successfull but can not send or receive email.

May  7 09:20:22 facit dovecot: master: Error: service(anvil): Socket already exists: /var/run/dovecot/anvil-auth-penalty

The problem is Dovecot cannot be started.

In iRedMail, Dovecot is POP3/IMAP/Managesieve server, and it's act as SMTP SASL auth daemon (Postfix will pass all SMTP authentication to Dovecot). So, if dovecot isn't running, you cannot send out email, and your clients cannot fetch emails via POP3/IMAP.

You can try below steps to fix it:

1) Execute rc script to stop dovecot service:

# /etc/init.d/dovecot stop

2) backup whole directory: /var/run/dovecot/. For example, copy the whole directory to another place.
3) Remove all files/directories under /var/run/dovecot/.
4) Try to start dovecot service:

# /etc/init.d/dovecot start

5) Check Dovecot log file (/var/log/dovecot.log), make sure it's running. Then try to send/receive email for testing.

7 Reply by pumamilenium

  • pumamilenium
  • Member
  • Offline
  • Registered: 2012-05-06
  • Posts: 11

Re: Instalation successfull but can not send or receive email.

i somehow passed the problem about the receiving. it's wierd now . i want to login from my home computer, being at home, and i cannot login. at work, where i am under the same IP like the server i can login and send/receive. i disabled the greylisting in a .conf file, and the mail worked. but i'm dazzeld with this problem. it's getting wierd. i think it may be half of guilt from the internet provider, having all these problems with the mail server.
before i succeded to make the server i allways selected on the intel prompt  only mysql, with no LDAP . after the LDAP instalation , i was able do do some receiving and the server worked ( untill now, i guess it still works, but i will make some modifications in the confs )
i will post everything so we can share the info. some ISP's may or may not try to stop the clients from making servers, maeby i have a similar problem. i will make it to work smile thanks big_smile i'l bee back with more info/logs big_smile

8 Reply by pumamilenium

  • pumamilenium
  • Member
  • Offline
  • Registered: 2012-05-06
  • Posts: 11

Re: Instalation successfull but can not send or receive email.

by the way, could there be some kind of limitation about the login ?  if you login from the same IP as the server, you are in. if you are connecting from any other IP you get a bad password message ? i think it's something like this .
is there in the configs a limitation about the IP class that is allowed to login to the server ?
thanks ! if all goes well i will make a tutorial about these kinds of problems and post it on the forum .

9 Reply by ZhangHuangbin

  • ZhangHuangbin
  • ZhangHuangbin
  • iRedMail Developers
  • Offline
  • Registered: 2009-05-06
  • Posts: 31,155

Re: Instalation successfull but can not send or receive email.

pumamilenium wrote:

is there in the configs a limitation about the IP class that is allowed to login to the server ?

How about configure this in firewall (iptables, ipfw, pf), allow the IP class to access POP3/IMAP/SMTP services.

10 Reply by pumamilenium

  • pumamilenium
  • Member
  • Offline
  • Registered: 2012-05-06
  • Posts: 11

Re: Instalation successfull but can not send or receive email.

this is interesting. so i can login from my work, i can receive and send mail, but the mail server does not allow remote login.  i am trying to connect from my home and i cannot login. i looked at the firewall but it's ok. i searched throught the net for the problem.
the problem right now is that i cannot login from a remote host to the server with thunderbird. everytime i try to connect it give me a bad password. so the server is working but still there is a problem with it. i really don't know what it is . i looked in the dovecot.conf file, the uid and gid lines are ok, there is the 1001 user id and it is correct, but i  can't login with thunderbird from a remote computer...
any ideas ZhangHuangbin ?
i'm still trying to see the problem but i can't.

11 Reply by pumamilenium

  • pumamilenium
  • Member
  • Offline
  • Registered: 2012-05-06
  • Posts: 11

Re: Instalation successfull but can not send or receive email.

i smelled half of the problem. i can login throug POP3, but IMAP is still in the air .
where can i modify the conf to get imap working ?

12 Reply by pumamilenium (edited by pumamilenium 2012-05-10 14:17:53)

  • pumamilenium
  • Member
  • Offline
  • Registered: 2012-05-06
  • Posts: 11

Re: Instalation successfull but can not send or receive email.

the /etc/dovecot.conf

May 08 09:45:48 master: Info: Dovecot v2.0.13 starting up (core dumps disabled)
May 08 09:46:05 dict: Info: mysql(127.0.0.1): Connected to database iredadmin
May 08 09:46:05 dict: Info: mysql(127.0.0.1): Connected to database iredadmin
May 08 09:53:52 auth: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill)
May 08 09:53:52 master: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill)
May 08 09:53:52 anvil: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill)
May 08 09:53:52 log: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill)
May 08 09:53:52 log: Error: Received master input for invalid service_fd 20: 20 21054 BYE
May 08 09:54:23 master: Info: Dovecot v2.0.13 starting up (core dumps disabled)
May 08 09:55:04 imap-login: Info: Aborted login (no auth attempts): rip=192.168.2.1, lip=192.168.2.5, TLS
May 08 09:55:04 imap-login: Info: Aborted login (no auth attempts): rip=192.168.2.1, lip=192.168.2.5, TLS
May 08 09:55:04 pop3-login: Info: Aborted login (no auth attempts): rip=192.168.2.1, lip=192.168.2.5, TLS
May 08 09:55:04 pop3-login: Info: Aborted login (no auth attempts): rip=192.168.2.1, lip=192.168.2.5, TLS
May 08 09:55:16 imap-login: Info: Aborted login (no auth attempts): rip=192.168.2.1, lip=192.168.2.5, TLS
May 08 09:55:16 imap-login: Info: Disconnected (no auth attempts): rip=192.168.2.1, lip=192.168.2.5, TLS: SSL_read() failed: error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca: SSL alert number 48
May 08 09:55:17 imap-login: Info: Aborted login (no auth attempts): rip=192.168.2.1, lip=192.168.2.5, TLS
May 08 09:55:32 imap-login: Info: Disconnected (auth failed, 3 attempts): user=<office>, method=PLAIN, rip=192.168.2.1, lip=192.168.2.5, TLS
May 08 09:55:32 imap-login: Info: Aborted login (no auth attempts): rip=192.168.2.1, lip=192.168.2.5, TLS
May 08 09:55:36 imap-login: Info: Login: user=<office@qwerty.ro>, method=PLAIN, rip=192.168.2.1, lip=192.168.2.5, mpid=1595, TLS
May 08 09:55:36 imap(office@qwerty.ro): Info: Disconnected: Logged out bytes=8/334
May 08 09:55:40 imap-login: Info: Aborted login (no auth attempts): rip=192.168.2.1, lip=192.168.2.5, TLS
May 08 09:55:40 imap-login: Info: Login: user=<office@qwerty.ro>, method=PLAIN, rip=192.168.2.1, lip=192.168.2.5, mpid=1598, TLS
May 08 09:55:41 dict: Info: mysql(127.0.0.1): Connected to database iredadmin
May 08 09:57:11 dict: Info: mysql(127.0.0.1): Connected to database iredadmin
May 08 09:57:44 imap-login: Info: Disconnected (no auth attempts): rip=79.119.141.129, lip=192.168.2.5, TLS handshaking: Disconnected
May 08 09:57:44 pop3-login: Info: Disconnected (no auth attempts): rip=79.119.141.129, lip=192.168.2.5, TLS handshaking: SSL_accept() failed: error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca: SSL alert number 48
May 08 09:57:44 pop3-login: Info: Aborted login (no auth attempts): rip=79.119.141.129, lip=192.168.2.5, TLS
May 08 09:57:44 imap-login: Info: Aborted login (no auth attempts): rip=79.119.141.129, lip=192.168.2.5, TLS
May 08 09:57:44 pop3-login: Info: Aborted login (no auth attempts): rip=79.119.141.129, lip=192.168.2.5, TLS
May 08 09:57:44 imap-login: Info: Aborted login (no auth attempts): rip=79.119.141.129, lip=192.168.2.5, TLS
May 08 09:57:44 imap-login: Info: Aborted login (no auth attempts): rip=79.119.141.129, lip=192.168.2.5, TLS
May 08 09:57:44 pop3-login: Info: Aborted login (no auth attempts): rip=79.119.141.129, lip=192.168.2.5, TLS
May 08 09:58:04 imap-login: Info: Aborted login (no auth attempts): rip=79.119.141.129, lip=192.168.2.5, TLS
May 08 09:58:04 imap-login: Info: Disconnected (no auth attempts): rip=79.119.141.129, lip=192.168.2.5, TLS handshaking: SSL_accept() failed: error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca: SSL alert number 48
May 08 09:58:05 imap-login: Info: Aborted login (no auth attempts): rip=79.119.141.129, lip=192.168.2.5, TLS
May 08 09:58:19 imap-login: Info: Disconnected (auth failed, 3 attempts): user=<office>, method=PLAIN, rip=79.119.141.129, lip=192.168.2.5, TLS
May 08 09:58:19 imap-login: Info: Aborted login (no auth attempts): rip=79.119.141.129, lip=192.168.2.5, TLS
May 08 09:58:23 imap-login: Info: Login: user=<office@qwerty.ro>, method=PLAIN, rip=79.119.141.129, lip=192.168.2.5, mpid=1630, TLS
May 08 09:58:24 imap(office@qwerty.ro): Info: Disconnected: Logged out bytes=8/334
May 08 09:58:25 imap-login: Info: Aborted login (no auth attempts): rip=79.119.141.129, lip=192.168.2.5, TLS
May 08 09:58:33 imap-login: Info: Disconnected (auth failed, 3 attempts): user=<office>, method=PLAIN, rip=79.119.141.129, lip=192.168.2.5, TLS
May 08 09:59:39 dict: Info: mysql(127.0.0.1): Connected to database iredadmin
May 08 10:01:39 dict: Info: mysql(127.0.0.1): Connected to database iredadmin
May 08 10:03:11 imap-login: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill)
May 08 10:03:11 config: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill)
May 08 10:03:11 anvil: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill)
May 08 10:03:11 log: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill)
May 08 10:03:11 imap(office@qwerty.ro): Info: Disconnected: Disconnected in IDLE bytes=823/4721
May 08 10:03:11 master: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill)
May 08 10:03:45 master: Info: Dovecot v2.0.13 starting up (core dumps disabled)
May 08 10:04:04 imap-login: Info: Aborted login (no auth attempts): rip=192.168.2.1, lip=192.168.2.5, TLS
May 08 10:04:04 imap-login: Info: Login: user=<office@qwerty.ro>, method=PLAIN, rip=192.168.2.1, lip=192.168.2.5, mpid=1571, TLS
May 08 10:04:04 dict: Info: mysql(127.0.0.1): Connected to database iredadmin
May 08 10:04:35 imap-login: Info: Aborted login (no auth attempts): rip=79.119.141.129, lip=192.168.2.5, TLS
May 08 10:05:01 imap-login: Info: Disconnected (auth failed, 6 attempts): user=<office>, method=PLAIN, rip=79.119.141.129, lip=192.168.2.5, TLS
May 08 10:05:36 dict: Info: mysql(127.0.0.1): Connected to database iredadmin
May 08 10:07:37 imap-login: Info: Aborted login (no auth attempts): rip=79.119.141.129, lip=192.168.2.5, TLS
May 08 10:07:39 dict: Info: mysql(127.0.0.1): Connected to database iredadmin
May 08 10:07:56 imap-login: Info: Disconnected (auth failed, 3 attempts): user=<office>, method=PLAIN, rip=79.119.141.129, lip=192.168.2.5, TLS
May 08 10:09:39 dict: Info: mysql(127.0.0.1): Connected to database iredadmin
May 08 10:11:39 dict: Info: mysql(127.0.0.1): Connected to database iredadmin
May 08 10:13:39 dict: Info: mysql(127.0.0.1): Connected to database iredadmin
May 08 10:15:36 dict: Info: mysql(127.0.0.1): Connected to database iredadmin
May 08 10:17:37 imap-login: Info: Aborted login (no auth attempts): rip=79.119.141.129, lip=192.168.2.5, TLS
May 08 10:17:39 dict: Info: mysql(127.0.0.1): Connected to database iredadmin
May 08 10:17:52 imap-login: Info: Disconnected (auth failed, 3 attempts): user=<office>, method=PLAIN, rip=79.119.141.129, lip=192.168.2.5, TLS
May 08 10:19:39 dict: Info: mysql(127.0.0.1): Connected to database iredadmin
May 08 10:21:39 dict: Info: mysql(127.0.0.1): Connected to database iredadmin
May 08 10:23:39 dict: Info: mysql(127.0.0.1): Connected to database iredadmin
May 08 10:25:36 dict: Info: mysql(127.0.0.1): Connected to database iredadmin
May 08 10:25:37 config: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill)
May 08 10:25:37 master: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill)
May 08 10:25:37 log: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill)
May 08 10:25:37 anvil: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill)
May 08 10:26:05 master: Info: Dovecot v2.0.13 starting up (core dumps disabled)
May 08 10:26:32 imap-login: Info: Aborted login (no auth attempts): rip=192.168.2.1, lip=192.168.2.5, TLS
May 08 10:26:32 imap-login: Info: Login: user=<office@qwerty.ro>, method=PLAIN, rip=192.168.2.1, lip=192.168.2.5, mpid=1642, TLS
May 08 10:26:32 dict: Info: mysql(127.0.0.1): Connected to database iredadmin
May 08 10:26:33 imap-login: Info: Aborted login (no auth attempts): rip=192.168.2.1, lip=192.168.2.5, TLS
May 08 10:26:33 imap-login: Info: Login: user=<office@qwerty.ro>, method=PLAIN, rip=192.168.2.1, lip=192.168.2.5, mpid=1647, TLS
May 08 10:27:27 imap-login: Info: Aborted login (no auth attempts): rip=79.119.141.129, lip=192.168.2.5, TLS
May 08 10:27:39 dict: Info: mysql(127.0.0.1): Connected to database iredadmin
May 08 10:27:43 imap-login: Info: Disconnected (auth failed, 3 attempts): user=<office>, method=PLAIN, rip=79.119.141.129, lip=192.168.2.5, TLS
May 08 10:28:20 imap-login: Info: Disconnected (auth failed, 6 attempts): user=<office>, method=PLAIN, rip=79.119.141.129, lip=192.168.2.5, TLS
May 08 10:29:39 dict: Info: mysql(127.0.0.1): Connected to database iredadmin
May 08 10:29:52 pop3-login: Info: Disconnected (auth failed, 1 attempts): user=<office>, method=PLAIN, rip=79.119.141.129, lip=192.168.2.5, TLS
May 08 10:30:00 pop3-login: Info: Disconnected (auth failed, 1 attempts): user=<office>, method=PLAIN, rip=79.119.141.129, lip=192.168.2.5, TLS
May 08 10:31:39 dict: Info: mysql(127.0.0.1): Connected to database iredadmin
May 08 10:33:39 dict: Info: mysql(127.0.0.1): Connected to database iredadmin
May 08 10:35:36 dict: Info: mysql(127.0.0.1): Connected to database iredadmin
May 08 10:37:39 dict: Info: mysql(127.0.0.1): Connected to database iredadmin
May 08 10:39:39 dict: Info: mysql(127.0.0.1): Connected to database iredadmin
May 08 10:40:40 pop3-login: Info: Aborted login (auth failed, 1 attempts): user=<admin>, method=PLAIN, rip=64.19.131.67, lip=192.168.2.5
May 08 10:40:46 pop3-login: Info: Aborted login (auth failed, 1 attempts): user=<admin>, method=PLAIN, rip=64.19.131.67, lip=192.168.2.5
May 08 10:40:49 imap-login: Info: Aborted login (no auth attempts): rip=79.119.141.129, lip=192.168.2.5, TLS
May 08 10:40:49 imap-login: Info: Aborted login (no auth attempts): rip=79.119.141.129, lip=192.168.2.5, TLS
May 08 10:40:49 pop3-login: Info: Aborted login (no auth attempts): rip=79.119.141.129, lip=192.168.2.5, TLS
May 08 10:40:49 pop3-login: Info: Aborted login (no auth attempts): rip=79.119.141.129, lip=192.168.2.5, TLS
May 08 10:40:50 pop3-login: Info: Aborted login (auth failed, 1 attempts): user=<admin>, method=PLAIN, rip=64.19.131.67, lip=192.168.2.5
May 08 10:40:57 pop3-login: Info: Aborted login (auth failed, 1 attempts): user=<admin>, method=PLAIN, rip=64.19.131.67, lip=192.168.2.5
May 08 10:41:01 pop3-login: Info: Aborted login (auth failed, 1 attempts): user=<admin>, method=PLAIN, rip=64.19.131.67, lip=192.168.2.5
May 08 10:41:03 pop3-login: Info: Aborted login (auth failed, 1 attempts): user=<admin>, method=PLAIN, rip=64.19.131.67, lip=192.168.2.5
May 08 10:41:10 pop3-login: Info: Aborted login (no auth attempts): rip=79.119.141.129, lip=192.168.2.5, TLS
May 08 10:41:14 pop3-login: Info: Aborted login (auth failed, 1 attempts): user=<admin>, method=PLAIN, rip=64.19.131.67, lip=192.168.2.5
May 08 10:41:17 pop3-login: Info: Aborted login (no auth attempts): rip=79.119.141.129, lip=192.168.2.5, TLS
May 08 10:41:17 pop3-login: Info: Disconnected (no auth attempts): rip=79.119.141.129, lip=192.168.2.5, TLS: SSL_read() failed: error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca: SSL alert number 48
May 08 10:41:19 pop3-login: Info: Aborted login (no auth attempts): rip=79.119.141.129, lip=192.168.2.5, TLS
May 08 10:41:33 pop3-login: Info: Disconnected (auth failed, 3 attempts): user=<office>, method=PLAIN, rip=79.119.141.129, lip=192.168.2.5, TLS
May 08 10:41:33 pop3-login: Info: Aborted login (no auth attempts): rip=79.119.141.129, lip=192.168.2.5, TLS
May 08 10:41:37 pop3-login: Info: Login: user=<office@qwerty.ro>, method=PLAIN, rip=79.119.141.129, lip=192.168.2.5, mpid=1823, TLS
May 08 10:41:37 pop3(office@qwerty.ro): Info: Disconnected: Logged out top=0/0, retr=0/0, del=0/1, size=1902
May 08 10:41:39 dict: Info: mysql(127.0.0.1): Connected to database iredadmin
May 08 10:41:42 pop3-login: Info: Aborted login (no auth attempts): rip=79.119.141.129, lip=192.168.2.5, TLS
May 08 10:41:42 pop3-login: Info: Login: user=<office@qwerty.ro>, method=PLAIN, rip=79.119.141.129, lip=192.168.2.5, mpid=1827, TLS
May 08 10:41:42 pop3(office@qwerty.ro): Info: Disconnected: Logged out top=0/0, retr=1/1919, del=0/1, size=1902
May 08 10:42:02 dict: Info: mysql(127.0.0.1): Connected to database iredadmin
May 08 10:43:37 pop3-login: Info: Aborted login (no auth attempts): rip=79.119.141.129, lip=192.168.2.5, TLS
May 08 10:43:38 pop3-login: Info: Login: user=<office@qwerty.ro>, method=PLAIN, rip=79.119.141.129, lip=192.168.2.5, mpid=1833, TLS
May 08 10:43:38 pop3(office@qwerty.ro): Info: Disconnected: Logged out top=0/0, retr=0/0, del=0/1, size=1902
May 08 10:43:38 pop3-login: Info: Disconnected: Inactivity (no auth attempts): rip=64.19.131.67, lip=192.168.2.5
May 08 10:43:39 dict: Info: mysql(127.0.0.1): Connected to database iredadmin
May 08 10:44:01 pop3-login: Info: Disconnected: Inactivity (auth failed, 1 attempts): user=<admin>, method=PLAIN, rip=64.19.131.67, lip=192.168.2.5
May 08 10:45:36 dict: Info: mysql(127.0.0.1): Connected to database iredadmin
May 08 10:47:39 dict: Info: mysql(127.0.0.1): Connected to database iredadmin
May 08 10:49:39 dict: Info: mysql(127.0.0.1): Connected to database iredadmin

13 Reply by pumamilenium

  • pumamilenium
  • Member
  • Offline
  • Registered: 2012-05-06
  • Posts: 11

Re: Instalation successfull but can not send or receive email.

works on pop3 but imap is out .... it's sad sad

14 Reply by keng

  • keng
  • Member
  • Offline
  • Registered: 2012-04-24
  • Posts: 14

Re: Instalation successfull but can not send or receive email.

test telnet 110,995,143,993

pop3 and imap demon is dovecot please try

#service dovecot restart

15 Reply by ZhangHuangbin

  • ZhangHuangbin
  • ZhangHuangbin
  • iRedMail Developers
  • Offline
  • Registered: 2009-05-06
  • Posts: 31,155

Re: Instalation successfull but can not send or receive email.

Show us output of command 'dovecot -n' please.

16 Reply by pumamilenium

  • pumamilenium
  • Member
  • Offline
  • Registered: 2012-05-06
  • Posts: 11

Re: Instalation successfull but can not send or receive email.

Guys,i made it to work smile
found out the little problem. I had problem with the user, referring to the Name smile after writing office@.... in full at the name and the email in thunderbird, got it to work flawlessly smile
Also, the firewall and all other stuff like the dovecot conf file were correct. i made it barely, because i had to work on the field for 2 days. it was like running with 2 dogs at  once ...
The correct instalation was when i selected the Ldap instalation. with no LDAP the mail server would not work at all ...
so Thanks LDAP big_smile smile
i will create a mail server for a small ISP , so this is and will be the best workshop ever.

also can i make a tutorial ? or something like this ?  and post it on the forum on a new thread ?

thanks smile

17 Reply by ZhangHuangbin

  • ZhangHuangbin
  • ZhangHuangbin
  • iRedMail Developers
  • Offline
  • Registered: 2009-05-06
  • Posts: 31,155

Re: Instalation successfull but can not send or receive email.

pumamilenium wrote:

also can i make a tutorial ? or something like this ?  and post it on the forum on a new thread ?

Creating a new forum topic is fine. smile