Jun 18 14:23:54 auth: Debug: Loading modules from directory: /usr/lib/dovecot/auth
Jun 18 14:23:54 auth: Debug: Module loaded: /usr/lib/dovecot/auth/libdriver_mysql.so
Jun 18 14:23:54 auth: Debug: Module loaded: /usr/lib/dovecot/auth/libdriver_pgsql.so
Jun 18 14:23:54 auth: Debug: Module loaded: /usr/lib/dovecot/auth/libdriver_sqlite.so
Jun 18 14:23:54 auth: Debug: Loading modules from directory: /usr/lib/dovecot/auth
Jun 18 14:23:54 auth: Debug: Module loaded: /usr/lib/dovecot/auth/libauthdb_ldap.so
Jun 18 14:23:54 auth: Debug: passwd-file /etc/dovecot/dovecot-master-users-password: Read 0 users in 0 secs
Jun 18 14:23:54 auth: Debug: auth client connected (pid=3865)
Jun 18 14:24:04 auth: Debug: client in: AUTH    1    PLAIN    service=imap    session=ZF2NThb83gAKCgEB    lip=10.10.1.50    rip=10.10.1.1    lport=143    rport=49374    resp=AHRlc3QxQGZhdGltYWgubGFuAEZhdGltYWgxMjM=
Jun 18 14:24:04 auth: Debug: ldap(test1@example.lan,10.10.1.1,<ZF2NThb83gAKCgEB>): bind search: base=dc=example,dc=lan filter=(&(mail=test1@example.lan)(objectClass=person))
Jun 18 14:24:04 auth: Debug: ldap(test1@example.lan,10.10.1.1,<ZF2NThb83gAKCgEB>): result: objectClass=top,top,top,top cn=test1 givenName=test1 distinguishedName=CN=test1,CN=Users,DC=example,DC=lan instanceType=4 whenCreated=20140617024241.0Z whenChanged=20140617031203.0Z displayName=test1 uSNCreated=24629 memberOf=CN=testgroups1,CN=Users,DC=fatimah,DC=lan uSNChanged=24644 name=test1 objectGUID=DŒ®<Õ?D’súG_Ri userAccountControl=66048 badPwdCount=0 codePage=0 countryCode=0 badPasswordTime=0 lastLogoff=0 lastLogon=0 pwdLastSet=130474465616476520 primaryGroupID=513 objectSid=<no values> accountExpires=9223372036854775807 logonCount=0 sAMAccountName=test1 sAMAccountType=805306368 objectCategory=CN=Person,CN=Schema,CN=Configuration,DC=example,DC=lan dSCorePropagationData=20140617061111.0Z,20140617061111.0Z,20140617061111.0Z lastLogonTimestamp=130474467710343708 mail=test1@example.lan; objectGUID,uSNCreated,objectCategory,objectClass,primaryGroupID,cn,givenName,objectSid,sAMAccountType,dSCorePropagationData,userAccountControl,name,mail,codePage,lastLogon,logonCount,countryCode,lastLogoff,uSNChanged,pwdLastSet,distinguishedName,sAMAccountName,memberOf,whenChanged,instanceType,badPwdCount,accountExpires,whenCreated,displayName,badPasswordTime,lastLogonTimestamp unused
Jun 18 14:26:34 auth: Error: PLAIN(test1@example.lan,10.10.1.1,<ZF2NThb83gAKCgEB>): Request 3865.1 timed out after 150 secs, state=1
Jun 18 14:26:54 imap-login: Info: Disconnected: Inactivity during authentication (disconnected while authenticating, waited 170 secs): user=<>, method=PLAIN, rip=10.10.1.1, lip=10.10.1.50, session=<ZF2NThb83gAKCgEB>
Jun 18 14:26:54 auth: Debug: client in: CANCEL    1

hosts           = adsvr.example.lan:389
ldap_version    = 3
auth_bind       = yes
dn              = cn=administrator,cn=users,dc=example,dc=lan
dnpass          = xxxxx
base            = dc=example,dc=lan
scope           = subtree
deref           = never

# Below two are required by command 'doveadm mailbox ...'
#iterate_attrs   = mail=user
#iterate_filter  = (&(objectClass=mailUser)(accountStatus=active)(enabledService=mail))

#user_filter     = (&(objectClass=mailUser)(accountStatus=active)(enabledService=mail)(enabledService=%Ls%Lc)(|(mail=%u)(&(enabledService=shadowaddress)(shadowAddress=%u))))
#user_attrs      = mail=user,homeDirectory=home,=mail=maildir:~/Maildir/,mailQuota=quota_rule=*:bytes=%$
#pass_filter     = (&(objectClass=mailUser)(accountStatus=active)(enabledService=mail)(enabledService=%Ls%Lc)(|(mail=%u)(&(enabledService=shadowaddress)(shadowAddress=%u))))
#pass_attrs      = mail=user,userPassword=password
user_filter     = (&(mail=%u)(objectClass=person))
pass_filter     = (&(mail=%u)(objectClass=person))
pass_attrs     = userPassword=password
default_pass_scheme = CRYPT
user_attrs     = =home=/var/vmail/vmail1/%Ld/%Ln/Maildir/,=mail=maildir:/var/vmail/vmail1/%Ld/%Ln/Maildir/
#user_attrs     = homeDirectory=home,uidNumber=uid,gidNumber=gid
#auth_bind_userdn = example.lan\%u

# Listen addresses.
#   - '*' means all available IPv4 addresses.
#   - '[::]' means all available IPv6 addresses.
# Listen on all available addresses by default
listen = *

#base_dir = /var/run/dovecot
mail_plugins = quota

# Enabled mail protocols.
protocols = pop3 imap sieve lmtp

# User/group who owns the message files:
mail_uid = 2000
mail_gid = 2000

# Assign uid to virtual users.
first_valid_uid = 2000
last_valid_uid = 2000

# Logging. Reference: http://wiki2.dovecot.org/Logging
log_path = /var/log/dovecot.log
mail_debug = yes
auth_verbose = yes
auth_debug = yes
auth_debug_passwords = yes
# Possible values: no, plain, sha1.
auth_verbose_passwords = no

# SSL: Global settings.
# Refer to wiki site for per protocol, ip, server name SSL settings:
# http://wiki2.dovecot.org/SSL/DovecotConfiguration
ssl = yes
verbose_ssl = no
#ssl_ca =</path/to/ca
ssl_cert = </etc/pki/tls/certs/iRedMail_CA.pem
ssl_key = </etc/pki/tls/private/iRedMail.key

# With disable_plaintext_auth=yes AND ssl=required, STARTTLS is mandatory.
# Set disable_plaintext_auth=no AND ssl=yes to allow plain password transmitted
# insecurely.
disable_plaintext_auth = no
# Allow plain text password per IP address/net
#remote 192.168.0.0/24 {
#   disable_plaintext_auth = no
#}

# Mail location and mailbox format.
mail_location = maildir:/%Lh/Maildir/:INDEX=/%Lh/Maildir/

# Authentication related settings.
# Append this domain name if client gives empty realm.
auth_default_realm = 

# Authentication mechanisms.
auth_mechanisms = PLAIN LOGIN

# Limits the number of users that can be logging in at the same time.
# Default is 100.
# Note: this value can be overrided by "process_limit =" in service
#       protocol. e.g.
#       protocol imap-login {
#           process_limit = 500
#       }
#default_process_limit = 100

service auth {
    unix_listener /var/spool/postfix/private/dovecot-auth {
        user = postfix
        group = postfix
        mode = 0666
    }
    unix_listener auth-master {
        user = vmail
        group = vmail
        mode = 0666
    }
    unix_listener auth-userdb {
        user = vmail
        group = vmail
        mode = 0660
    }
}

# LMTP server (Local Mail Transfer Protocol).
# Reference: http://wiki2.dovecot.org/LMTP
service lmtp {
    user = vmail

    # For higher volume sites, it may be desirable to increase the number of
    # active listener processes. A range of 5 to 20 is probably good for most
    # sites.
    process_min_avail = 5

    # Logging.
    # Require 'info_log_path =' in 'protocol lmtp {}' block.
    executable = lmtp -L

    # Listening on socket file and TCP
    unix_listener /var/spool/postfix/private/dovecot-lmtp {
        user = postfix
        group = postfix
        mode = 0600
    }

    inet_listener lmtp {
        #address = 192.168.0.24 127.0.0.1 ::1
        port = 24
    }
}

# Virtual mail accounts.
userdb {
    args = /etc/dovecot/dovecot-ldap.conf
    driver = ldap
}
passdb {
    args = /etc/dovecot/dovecot-ldap.conf
    driver = ldap
}

# Master user.
# Master users are able to log in as other users. It's also possible to
# directly log in as any user using a master password, although this isn't
# recommended.
# Reference: http://wiki2.dovecot.org/Authentication/MasterUsers
auth_master_user_separator = *
passdb {
    driver = passwd-file
    args = /etc/dovecot/dovecot-master-users-password
    master = yes
}

plugin {
    auth_socket_path = /var/run/dovecot/auth-master

    quota = dict:user::proxy::quotadict
    quota_rule = *:storage=1G
    #quota_rule2 = *:messages=0
    #quota_rule3 = Trash:storage=1G
    #quota_rule4 = Junk:ignore

    # Quota warning.
    # If user suddenly receives a huge mail and the quota jumps from
    # 85% to 95%, only the 95% script is executed.
    quota_warning = storage=85%% quota-warning 85 %u
    quota_warning2 = storage=90%% quota-warning 90 %u
    quota_warning3 = storage=95%% quota-warning 95 %u

    # Plugin: expire.
    #expire = Trash 7 Trash/* 7 Junk 30
    #expire_dict = proxy::expire

    # ACL and share folder
    acl = vfile
    acl_shared_dict = proxy::acl

    # By default Dovecot doesn't allow using the IMAP "anyone" or
    # "authenticated" identifier, because it would be an easy way to spam
    # other users in the system. If you wish to allow it,
    #acl_anyone = allow

    # Pigeonhole managesieve service.
    # Reference: http://wiki2.dovecot.org/Pigeonhole/Sieve/Configuration
    # Per-user sieve settings.
    sieve_dir = /%Lh/sieve
    sieve = /%Lh/sieve/dovecot.sieve

    # Global sieve settings.
    sieve_global_dir = /var/vmail/sieve
    sieve_default = /var/vmail/sieve/dovecot.sieve
    #sieve_before =
    #sieve_after =
}

service quota-warning {
    executable = script /usr/local/bin/dovecot-quota-warning.sh
    unix_listener quota-warning {
        user = vmail
        group = vmail
        mode = 0660
    }
}

service dict {
    unix_listener dict {
        mode = 0660
        user = vmail
        group = vmail
    }
}

dict {
    #expire = db:/var/lib/dovecot/expire/expire.db
    quotadict = mysql:/etc/dovecot/dovecot-used-quota.conf
    acl = mysql:/etc/dovecot/dovecot-share-folder.conf
}

protocol lda {
    # Reference: http://wiki2.dovecot.org/LDA
    mail_plugins = $mail_plugins sieve
    auth_socket_path = /var/run/dovecot/auth-master
    log_path = /var/log/dovecot-sieve.log
    lda_mailbox_autocreate = yes
    postmaster_address = root
}

protocol lmtp {
    # Log file
    info_log_path = /var/log/dovecot-lmtp.log

    # Plugins
    mail_plugins = quota sieve
    postmaster_address = postmaster

    lmtp_save_to_detail_mailbox = yes
    recipient_delimiter = +
}

protocol imap {
    mail_plugins = $mail_plugins imap_quota
    imap_client_workarounds = tb-extra-mailbox-sep

    # Maximum number of IMAP connections allowed for a user from each IP address.
    # NOTE: The username is compared case-sensitively.
    # Default is 10.
    # Increase it to avoid issue like below:
    # "Maximum number of concurrent IMAP connections exceeded"
    #mail_max_userip_connections = 20
}
protocol pop3 {
    mail_plugins = $mail_plugins
    pop3_client_workarounds = outlook-no-nuls oe-ns-eoh
    pop3_uidl_format = %08Xu%08Xv

    # Maximum number of IMAP connections allowed for a user from each IP address.
    # NOTE: The username is compared case-sensitively.
    # Default is 10.
    #mail_max_userip_connections = 20
}

# Login processes. Refer to Dovecot wiki for more details:
# http://wiki2.dovecot.org/LoginProcess
service imap-login {
    service_count = 1

    # To avoid startup latency for new client connections, set process_min_avail
    # to higher than zero. That many idling processes are always kept around
    # waiting for new connections.
    #process_min_avail = 0

    # number of simultaneous IMAP connections
    #process_limit = $default_process_limit
    process_limit = 500

    # vsz_limit should be fine at its default 64MB value
    #vsz_limit = 64M
}
service pop3-login {
    service_count = 1

    # number of simultaneous POP3 connections
    #process_limit = 500
}

namespace {
    type = private
    separator = /
    prefix =
    #location defaults to mail_location.
    inbox = yes

    mailbox Sent {
        auto = subscribe
        special_use = \Sent
    }
    # This is an alias mailbox for "Sent".
    # Reference: http://wiki2.dovecot.org/MailboxSettings
    mailbox "Sent Messages" {
        auto = no
        special_use = \Sent
    }

    mailbox Drafts {
        auto = subscribe
        special_use = \Drafts
    }
    mailbox Trash {
        auto = subscribe
        special_use = \Trash
    }

    mailbox Junk {
        auto = subscribe
        special_use = \Junk
    }
    # Alias mailbox for "Junk".
    mailbox Spam {
        auto = no
        special_use = \Junk
    }
}

namespace {
    type = shared
    separator = /
    prefix = Shared/%%u/
    location = maildir:/%%Lh/Maildir/:INDEX=/%%Lh/Maildir/Shared/%%u
    # this namespace should handle its own subscriptions or not.
    subscriptions = yes
    list = children
}

# Public mailboxes.
# Refer to Dovecot wiki page for more details:
# http://wiki2.dovecot.org/SharedMailboxes/Public
#namespace {
#    type = public
#    separator = /
#    prefix = Public/
#
#    # CONTROL=: Mark this public folder as read-only mailbox
#    # INDEX=: Per-user \Seen flag
#    location = maildir:/var/vmail/public/:CONTROL=~/Maildir/public:INDEX=~/Maildir/public
#
#    # Allow users to subscribe to the public folders.
#    subscriptions = yes
#}