Thx for the reply.
It is set to yes right.
If not what line do i need to change.
This is my /etc/dovecot/dovecot.conf:
#
# File generated by iRedMail (2011.05.11.09.53.14):
#
# Version: 0.7.0
# Project: http://www.iredmail.org/
#
# Community: http://www.iredmail.org/forum/
#
# Provided services.
protocols = pop3 pop3s imap imaps managesieve
# Listen addresses. for Dovecot-1.1.x.
# ipv4: *
# ipv6: [::]
#listen = *, [::]
listen = *
# mail uid/gid.
mail_uid = 1001
mail_gid = 1000
first_valid_uid = 1001
last_valid_uid = 1001
#Debug options.
mail_debug = yes
auth_verbose = yes
auth_debug = yes
auth_debug_passwords = yes
#Log file.
log_timestamp = "%Y-%m-%d %H:%M:%S "
log_path = /var/log/dovecot.log
login_processes_count = 3
login_max_processes_count = 128
login_max_connections = 256
# Maximum number of running mail processes. Default is 512.
# When this limit is reached, new users aren't allowed to log in.
#max_mail_processes = 512
# Set max process size in megabytes. Default is 256.
# Most of the memory goes to mmap()ing files, so it shouldn't harm
# much even if this limit is set pretty high.
#
# Note:
# Some user reported that if mailbox is too large (e.g. 80GB), dovecot
# will disconnect the client with error:
# "pool_system_malloc(100248): Out of memory".
mail_process_size = 1024
disable_plaintext_auth = no
# Performance Tuning. Reference:
# http://wiki.dovecot.org/LoginProcess
#
# High-Security mode. Dovecot default setting.
#
# It works by using a new imap-login or pop3-login process for each
# incoming connection. Since the processes run in a highly restricted
# chroot, running each connection in a separate process means that in
# case there is a security hole in Dovecot's pre-authentication code
# or in the SSL library, the attacker can't see other users'
# connections and can't really do anything destructive.
login_process_per_connection=yes
#
# High-Performance mode.
#
# It works by using a number of long running login processes,
# each handling a number of connections. This loses much of
# the security benefits of the login process design, because
# in case of a security hole the attacker is now able to see
# other users logging in and steal their passwords.
#login_process_per_connection = no
# Default realm/domain to use if none was specified.
# This is used for both SASL realms and appending '@domain.ltd' to username in plaintext logins.
auth_default_realm = erik.nl
# ---- NFS storage ----
# Set to 'no' For NFSv2. Default is 'yes'.
#dotlock_use_excl = yes
#mail_nfs_storage = yes # v1.1+ only
# If indexes are on NFS.
#mail_nfs_index = yes # v1.1+ only
# ----
plugin {
# Quota warning.
#
# You can find sample script from Dovecot wiki:
# http://wiki.dovecot.org/Quota/1.1#head-03d8c4f6fb28e2e2f1cb63ec623810b45bec1734
#
# If user suddenly receives a huge mail and the quota jumps from
# 85% to 95%, only the 95% script is executed.
#
quota_warning = storage=85%% /usr/local/bin/dovecot-quota-warning.sh 85
quota_warning2 = storage=90%% /usr/local/bin/dovecot-quota-warning.sh 90
quota_warning3 = storage=95%% /usr/local/bin/dovecot-quota-warning.sh 95
}
# SSL support.
ssl = yes
verbose_ssl = no
ssl_key_file = /etc/ssl/private/iRedMail.key
ssl_cert_file = /etc/ssl/certs/iRedMail_CA.pem
ssl_ca_file = /etc/ssl/certs/iRedMail_CA.pem
# Maildir format and location.
mail_location = maildir:/%Lh/Maildir/:INDEX=/%Lh/Maildir/
plugin {
# Quota, stored in file 'maildirsize' under user mailbox.
# Dict quota. Used to store realtime quota in SQL.
quota = dict:user::proxy::quotadict
# Quota rules. Reference: http://wiki.dovecot.org/Quota/1.1
# The following limit names are supported:
# - storage: Quota limit in kilobytes, 0 means unlimited.
# - bytes: Quota limit in bytes, 0 means unlimited.
# - messages: Quota limit in number of messages, 0 means unlimited. This probably isn't very useful.
# - backend: Quota backend-specific limit configuration.
# - ignore: Don't include the specified mailbox in quota at all (v1.1.rc5+).
quota_rule = *:storage=0
#quota_rule2 = *:messages=0
#quota_rule3 = Trash:storage=1G
#quota_rule4 = Junk:ignore
}
dict {
# NOTE: dict process currently runs as root, so this file will be owned as root.
expire = db:/var/lib/dovecot/expire/expire.db
}
plugin {
# ---- Expire plugin ----
# Expire plugin. Mails are expunged from mailboxes after being there the
# configurable time. The first expiration date for each mailbox is stored in
# a dictionary so it can be quickly determined which mailboxes contain
# expired mails. The actual expunging is done in a nightly cronjob, which
# you must set up:
#
# 1 3 * * * /usr/sbin/dovecot --exec-mail ext /usr/libexec/dovecot/expire-tool
#
# Trash: 7 days
# Trash's children directories: 7 days
# Junk: 30 days
expire = Trash 7 Trash/* 7 Junk 30
expire_dict = proxy::expire
# If you have a non-default path to auth-master, set also:
auth_socket_path = /var/run/dovecot/auth-master
}
# Per-user sieve mail filter.
plugin {
# For maildir format.
sieve = /var/vmail/sieve/%Ld/%Ln/dovecot.sieve
}
# LDA: Local Deliver Agent
protocol lda {
postmaster_address = root
auth_socket_path = /var/run/dovecot/auth-master
mail_plugins = quota sieve autocreate
sieve_global_path = /var/vmail/sieve/dovecot.sieve
log_path = /var/log/sieve.log
}
# IMAP configuration
protocol imap {
mail_plugins = quota imap_quota autocreate
imap_client_workarounds = tb-extra-mailbox-sep
# number of connections per-user per-IP
#mail_max_userip_connections = 10
}
# POP3 configuration
protocol pop3 {
mail_plugins = quota
pop3_uidl_format = %08Xu%08Xv
pop3_client_workarounds = outlook-no-nuls oe-ns-eoh
# number of connections per-user per-IP
#mail_max_userip_connections = 10
}
auth default {
mechanisms = plain login
user = vmail
passdb ldap {
args = /etc/dovecot/dovecot-ldap.conf
}
userdb ldap {
args = /etc/dovecot/dovecot-ldap.conf
}
socket listen {
master {
path = /var/run/dovecot/auth-master
mode = 0666
user = vmail
group = vmail
}
client {
path = /var/spool/postfix/dovecot-auth
mode = 0666
user = postfix
group = postfix
}
}
}
plugin {
autocreate = INBOX
autocreate2 = Sent
autocreate3 = Trash
autocreate4 = Drafts
autocreate5 = Junk
autosubscribe = INBOX
autosubscribe2 = Sent
autosubscribe3 = Trash
autosubscribe4 = Drafts
autosubscribe5 = Junk
}
dict {
# Dict quota. Used to store realtime quota in SQL.
quotadict = mysql:/etc/dovecot/dovecot-used-quota.conf
}
namespace private {
separator = /
prefix =
#location defaults to mail_location.
inbox = yes
}
namespace shared {
separator = /
prefix = Shared/%%u/
location = maildir:/%%Lh/Maildir/:INDEX=/%%Lh/Maildir/Shared/%%u
# this namespace should handle its own subscriptions or not.
subscriptions = yes
list = children
}
plugin {
acl = vfile
acl_shared_dict = proxy::acl
}
dict {
acl = mysql:/etc/dovecot/dovecot-share-folder.conf
}
# ManageSieve service. http://wiki.dovecot.org/ManageSieve
protocol managesieve {
# IP or host address where to listen in for connections.
listen = 127.0.0.1:2000
# Login executable location.
#login_executable = /usr/local/libexec/dovecot/managesieve-login
# ManageSieve executable location. See IMAP's mail_executable above for
# examples how this could be changed.
#mail_executable = /usr/local/libexec/dovecot/managesieve
# Maximum ManageSieve command line length in bytes. This setting is
# directly borrowed from IMAP. But, since long command lines are very
# unlikely with ManageSieve, changing this will not be very useful.
#managesieve_max_line_length = 65536
# ManageSieve logout format string:
# %i - total number of bytes read from client
# %o - total number of bytes sent to client
#managesieve_logout_format = bytes=%i/%o
# If, for some inobvious reason, the sieve_storage remains unset, the
# ManageSieve daemon uses the specification of the mail_location to find out
# where to store the sieve files (see explaination in README.managesieve).
# The example below, when uncommented, overrides any global mail_location
# specification and stores all the scripts in '~/mail/sieve' if sieve_storage
# is unset. However, you should always use the sieve_storage setting.
# mail_location = mbox:~/mail
# To fool ManageSieve clients that are focused on timesieved you can
# specify the IMPLEMENTATION capability that the dovecot reports to clients
# (default: "dovecot").
#managesieve_implementation_string = dovecot
}
# sieve plugin. http://wiki.dovecot.org/LDA/Sieve
plugin {
# If the user has no personal active script (i.e. if the file
# indicated in sieve= does not exist), use this one:
#sieve_global_path = /var/vmail/sieve/dovecot.sieve
# The include extension fetches the :global scripts from this
# directory.
#sieve_global_dir =
# Path to a script file or a directory containing script files
# that need to be executed before the user's script. If the path
# points to a directory, all the Sieve scripts contained therein
# (with the proper .sieve extension) are executed. The order of
# execution is determined by the file names, using a normal 8bit
# per-character comparison.
#sieve_before = /var/vmail/sieve/dovecot.sieve
# Identical to sieve_before, only the specified scripts are
# executed after the user's script (only when keep is still in
# effect!).
#sieve_after = /var/vmail/sieve/dovecot.sieve
# Location of the active script. When ManageSieve is used this is actually
# a symlink pointing to the active script in the sieve storage directory.
sieve = /var/vmail/sieve/%Ld/%Ln/dovecot.sieve
# The path to the directory where the personal Sieve scripts are stored. For
# ManageSieve this is where the uploaded scripts are stored.
sieve_dir = /var/vmail/sieve/%Ld/%Ln/
}
When i restart Dovecot i have this massage:
erik:~ # service dovecot restart
Stopping dovecot done
Starting dovecot ILoading modules from directory: /usr/lib/dovecot/modules/imap
IModule loaded: /usr/lib/dovecot/modules/imap/lib10_quota_plugin.so
IModule loaded: /usr/lib/dovecot/modules/imap/lib11_imap_quota_plugin.so
IModule loaded: /usr/lib/dovecot/modules/imap/lib20_autocreate_plugin.so
IEffective uid=65534, gid=65533, home=/tmp
IQuota root: name=user backend=dict args=:proxy::quotadict
IQuota rule: root=user mailbox=* bytes=0 messages=0
IQuota warning: bytes=0 (85%) messages=0 command=/usr/local/bin/dovecot-quota-warning.sh 85
IQuota warning: bytes=0 (90%) messages=0 command=/usr/local/bin/dovecot-quota-warning.sh 90
IQuota warning: bytes=0 (95%) messages=0 command=/usr/local/bin/dovecot-quota-warning.sh 95
Fatal: execv(/usr/lib/dovecot/managesieve) failed: Permission denied
Error: managesieve dump-capability process returned 84
Fatal: Invalid configuration in /etc/dovecot/dovecot.conf
startproc: exit status of parent of /usr/sbin/dovecot: 89
failed
Greets Davano
